View LA76933J_221533.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENA1102A
Monolithic Linear IC
LA7693X Series
Overview
For NTSC/PAL/SECAM Color TVs
Built-in CTV Microcontroller Video and Sound Processing ICs (VIF/SIF/Y/C/Deflection/CbCr IN)
The LA7693X series is a single-chip video and sound processor IC with a built-in microcontroller that supports all of the different worldwide broadcasting systems. The IC provides fully integrated solution to rationalize the design of color TV sets, increase productivity, and reduce total costs.
Functions
* I2C bus control system with a built-in microcontroller * VIF/SIF/Y/C/Deflection/CbCr IN * Adjustment-free VIF/SIF * 1X'tal multi-system that supports all broadcasting systems * No VCO coil required * Internal sound carrier BPF, 4-system sound carrier trap * Digital AFT system * Supports EW (LA76933J, LA76938Y) * Supports SECAM (LA76936Y, LA76938Y) Line-up
Type name LA76931K LA76933J LA76936Y LA76938Y NTSC PAL SECAM x x Deflection CbCr input E/W x

x
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. www..com Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment.
30409 MS / 31908 MS PC 20070703-S00008 No.A1102-1/6
LA7693X series
Specifications
Maximum Ratings (BIP Chip) at Ta = 25C
Parameter Maximum supply voltage Symbol V8 max V43 max V55 max Maximum supply current I11 max I19 max Allowable power dissipation Operating temperature Storage temperature Pd max Topr Tstg Ta 65C * Conditions Ratings 7.0 7.0 7.0 25 35 1.6 -10 to +65 -55 to +150 Unit V V V mA mA W C C
* Mounted on a substrate : 213mmx140mmx1.6mm, glass epoxy board.
Absolute Maximum Ratings (Micro-computer Chip) at Ta = 25C, VSS = 0V
Parameter Maximum supply voltege Symbol VDD max VDD RES FILT Ports0, 1 Ports04 to 07, 1 Ports04 to 07, 1 Ports0, 1 Ports0, 1 *CMOS output *For each pin. IOAH IOPL IOAL The total of all pins. For cach pin The total of all pins. -15 20 30 mA mA mA Pins Mask Flash Input voltege Output voltege Input/output voltege High level output current Peak output current *2 Total output current Low lever output current Peak output current *2 Toral output current *1 J : unted on a MASKROM = 24KB, K : MASKROM = 28KB, L : MASKROM = 32KB, M : MASKROM = 40KB, N : MASKROM = 48KB FB : FLASHROM = 48KB (This production is produced and sold by SANYO under license of the Silicon Storage Technology Inc.) *2 The average current for each pin must not be over 1mA. VI VO VIO IOPH Conditions min -0.3 -0.3 -0.3 -0.3 -0.3 -4 Ratings typ max +6.0 +6.5 VDD+0.3 VDD+0.3 VDD+0.3 V V V V V mA Unit
Operating Conditions (Bip Chip) at Ta = 25C
Parameter Recommended supply voltege Symbol V8 V43 V55 Recommended supply current I11 I19 Operating supply voltege range V8 op V43 op V55 op Operating supply current range I11 op I19 op Conditions Ratings 5.0 5.0 5.0 19 31 4.7 to 5.3 4.7 to 5.3 4.7 to 5.3 28 to 34 17 to 21 Unit V V V mA mA V V V mA mA
www..com
No.A1102-2/6
LA7693X series
Recommended Operating Range (Micro-computer Chip) at Ta = -10C to +65C, VSS = 0V
Parameter Operating supply voltege Hold voltage High level input voltage VHD VIH (1) VIH (2) VDD Ports04 to 07 Ports00 to 03, 1 (Schumitt) RES (Schumitt) Low level input voltage VIL (1) VIL (2) Ports0 Ports00 to 03, 1 (Schumitt) RES (Schumitt) Operation cycle time tCYC (1) tCYC (2) FmRC All functions operating OSD and Data slicer are not operating Oscillation frequency range (Note) FLASH-ROM erase/write temperature range : Ta = 252C (VDD = 4.5 to 5.5V) Internal RC oscillation 4.5 to 5.5 0.4 0.8 3.0 MHz 4.5 to 5.5 4.5 to 5.5 0.844 0.844 0.848 0.852 400 s s Output disable Output disable 4.5 to 5.5 4.5 to 5.5 VSS VSS 0.25VDD 0.25VDD V V RAMs and the registers data are kept in HOLD mode. Output disable Output disable 4.5 to 5.5 4.5 to 5.5 0.75VDD 0.75VDD VDD VDD V V 2.0 5.5 V Symbol VDD Pins VDD max Conditions VDD [V] Ratings min 4.5 typ max 5.5 V Unit
Package Dimensions
unit : mm (typ) 3300
57.2
64
33
0.95
5.1max
0.51min
3.8
(4.25)
1.78 (1.01)
0.5
SANYO : DIP64S(600mil)
www..com
0.2
1
32
15.24
13.8
No.A1102-3/6
VDD RGB 9V ABL EXT-AUDIO 5V IN VOLUME OUT FM OUT
VM OUT(933)
120
www..com
0.47F (M) 42
B OUT G OUT R OUT
10pF
(METAL FILM) 0.015F (M) VER OUT
E/W OUT (933)
HOR OUT
P17 1F 100F 0.01F 1500pF
P02
+ + + +
10F
+
INT3/P03 IRDA 100F 100F 0.01F 0.01F
INT1/P01
INT0/P00
+ 39k 1F
Block Diagram 1 LA76931K/933J
ADC HS VS BUS COLOR CLAMP TRAP RGB MATRIX BS SG DL SHARP V/Y SW
CLOCK CONTROL
SCK1/P13 V RAMP 0.015F 4.7k 3k 0.022F
SDA1/P12
PWM3/P16
PWM2/P15
PWM1/P14
+10k 0.01F
1CHIP GND 9 8 7 6 5 4 11
0.022F 3 2 1
NC 15
32
HOR OUT E/W (933) ABL ACL DRIVE/OUT-OFF AFC2 BER SEP FBP BER C/D SW HOR VC0 1/256 AFC1 HOR C/D SYNC SEP CONTRAST BRIGHT SW (933) VM (933) SPLL OSD SW CONTRAST BRIGHT DC VOL HOR VCC VER RAMP PHASE SHIFTER OSD DC REST TINT PAL SW DEMO ACC BPF VCO APC2 DDS VXO APC1 VIDEO SW DAH YC SW SW 1H DL BUS VCO CLAMP DC ADJ SW FSC SW CLMP CLMP CLMP CLMP AFT
TIMER 0
31 41 42
I/0 PORT 1
CLOCK CONTROL
30
29
28
27
26
C_SYNC
CLOCK
DATA
25
24
23
22
21
20
19
18
17
16
14
13
12
10
FM AMP
BPF
I
FM DET LIM AMP
500K DET BPF
FS
B
G
BUS
OSD
R SOUND DET
HS
RAM
ROM
BASE TIMER
CPU CORE
VS
ENABLE
I/0 PORT 0
PDC VIDEO DET VIF AMP
CVBS
CPU TST B
LA7693X series
RST
PLL
CPU TST G TRAP
CPU TST R
IF AGC
RESET
AFF
SW
VDD
VIDEO AMP
RF REC
40
33
34
35
36
37
38
39
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
+
+
+
+
390k 750
12k
+ + + +
+
+
47k
1F
1F
1F
1F
1F
0.1F
0.1F
680k
100F
0.1F
0.01F
100F
0.01F
1M
0.1F
2.2F
0.33F
+
SAW FIL
4.43M
0.033F
0.047F
100F
CPU GND
0.01F
+
560 0.47F
150k AN7/P07
NC(933)
2.2F 100
AN4/P04
AN5/P05
AN6/P06
18pF 100 20k
FBP YC-C YC-Y
18pF
47k
0.47F CR DVD-Y CB
+
SVO/FSC INT-V
VDD
EXT-V VCC:5V VCD
VCC
OUT RF-AGC VIDEO
IF IN
No.A1102-4/6
VDD
VM OUT(938) RGB 9V ABL EXT-AUDIO 5V IN VOLUME OUT FM OUT
120
www..com
0.47F (M) 47
NC E/WOUT (933) B OUT G OUT R OUT
10pF
(METAL FILM) 0.015F (M) VER OUT
HOR OUT
P17 1F 100F 0.01F 1500pF
P02
+ + + +
10F
+
INT3/P03 IRDA 100F 100F 0.01F 0.01F
INT1/P01
INT0/P00
+ 39k 1F
Block Diagram 2 LA76936Y/938Y
ADC HS VS BUS COLOR CLAMP TRAP RGB MATRIX BS SG DL SHARP V/Y SW
CLOCK CONTROL SW SW SW SW
SCK1/P13 V RAMP 0.015F 4.7k 3k 0.022F
SDA1/P12
PWM3/P16
PWM2/P15
PWM1/P14
+10k 0.01F
1CHIP GND 9 8 7 6 5 4 11
0.022F 3 2 1
32
HOR OUT ABL ACL DRIVE/OUT-OFF AFC2 BER SEP FBP BER C/D SW HOR VC0 1/256 AFC1 CONTRAST BRIGHT SW (933) VM (933) OSD SPLL OSD SW CONTRAST BRIGHT HOR C/D SYNC SEP DC VOL HOR VCC E/W (933) VER RAMP PHASE SHIFTER DC REST TINT VCO APC2 BUS SECAM DECODER CLAMP DC ADJ SW DDS VXO APC1 VIDEO SW DAH FSC SW PAL SW DEMO ACC BPF YC SW SW 1H DL VCO CLMP CLMP CLMP CLMP AFT
TIMER 0
31
I/0 PORT 1
CLOCK CONTROL
30
29
28
27
26
C_SYNC
CLOCK
DATA
25
24
23
22
21
20
19
18
17
16
15
14
13
12
10
FM AMP
BPF
I
FM DET LIM AMP
500K DET BPF
FS
B
G
BUS
OSD
R
HS
SOUND DET
RAM
ROM
BASE TIMER
CPU CORE
VS
ENABLE
I/0 PORT 0
PDC VIDEO DET VIF AMP
CVBS
CPU TST B
LA7693X series
RST
PLL
CPU TST G TRAP IF AGC
CPU TST R
RESET
AFF
SW
VDD
VIDEO AMP
RF REC
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
+
+
+
+
390k
NC (R IN)
12k
+ + +
+
+
1F
47k
1F
1F
1F
20k
0.1F
680k
100F
0.1F
0.1F
0.01F
100F
0.01F
1M
0.1F
2.2F
0.33F
+
SAW FIL
0.033F
0.047F
100F
CPU GND
0.01F
+
560 0.47F
150k AN7/P07
2.2F 100
AN4/P04
AN5/P05
AN6/P06
18pF 100
FBP YC -C (B IN) YC-Y (G IN)
18pF
47k
0.47F DVD-Y (FB IN) CB CR IN SVO/FSC EXT-V VCC:5V VCD INT-V
+
VDD
VCC
OUT RF-AGC VIDEO
IF IN
No.A1102-5/6
LA7693X series
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed www..com for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above.
This catalog provides information as of March, 2009. Specifications and information herein are subject to change without notice. PS No.A1102-6/6

▲Up To Search▲

Price & Availability of LA76933J

	To Download LA76933J Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .